Here I am

Engine/Transmission (1998.5 - 2002) Installing exhaust brake

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission Bed Liner

Status
Not open for further replies.
I am trying to install a BD exhaust brake and need help locating the vacuum hose that I am suppose to cut and bypass from.



thanks,

Mike
 
the vacuum pump is located in front of the power steering pump. the line you need is hooked to the vacuum pump and is somewhat beside the power steering pump.

hope this helps

-doug
 
I see where the power steering resevoir is and have a line that goes to the brake master cylinder. Actually there are three lines that go the master cylinder and the one I am talking about is in the middle of the three.



Is this the line I want to tap into?



It goes directly under the power steering resevoir. I do not want to cut any lines until I am absolutely sure.



Mike
 
Status
Not open for further replies.
Back
Top