Here I am

2nd Gen Non-Engine/Transmission Instrument panel fuse? Is there one?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1994 - 1998) Disabling the 4x4 on a 97

2nd Gen Non-Engine/Transmission Test Drove an '01 HO today!

Status
Not open for further replies.
I have been taking all my goodies off of my 6spd and when I got some of it back together, enough to start it anyways, I lost my instruments. Is there a fuse somewhere that I am missing? I looked through them all and they look fine, so I thought I would ask before metering every fuse. Any other ideas why I might lose the instruments would be helpful.



TIA

Nathan
 
Yes there is , I think it is labeled as cluster and its in the fuse panel under the drivers A piller on the side of the dash.



cheers, Kevin
 
Fuse 14 in the Junction Block (fuse panel inside the cab on the left side of the dash – the door or hatch is only visible with the driver’s door open). The fuse is a 10A and is the 3rd fuse from the left in the second row of fuses (at the top of the junction block). Anyway, that’s the place to start.
 
Status
Not open for further replies.
Back
Top