Intake adapter size for turbo upgrade?

[93D250]

I just ordered a 60mm compressor and 16cm exhaust housing for my turbo from steve at Gillett diesel. Does anyone know what size reducers I need to adapt this to a stock air cleaner and intercooler? I have an afe filter w 2 4" inlets to the stock housing, I figure I'll run it for now... I wanted to get the hoses before the turbo gets here so the truck isn't down waiting for parts.

I assume it's a 2. 5 to 3" and a 4 to 5" ?

The truck is a 93 D250

Jake

 

[dpuckett]

If you have a 60mm impellar wheel, the inlets are the same size as the stock 54mm H1C- you shouldnt need any adaptors for an intercooled truck. Just take off your filter hose, install your new turbo, and go on.



Daniel

 

[93D250]

Thanks Daniel. This is a stage II or III they are calling it at gillett, Steve said that I would need new hoses but I forgot to ask what size. I'm not doubting you, it's just different from what he said

 

[dpuckett]

Maybe he thought you had a nonIC truck. If that were the case, you would need to do some modifying.



DP

 

[sdstriper]

This is right off Gillett's site,



"60mm inducer Compressor Housing and

Wheel combination.



New Holset Comp. Wheel & Housing combination. Largest available Holset housing and wheel combination that will bolt to the turbo. Great flow capability. Adds map width enhancement slot.



4” inlet hose and a 2. 5” outlet hose size. "

 

[dpuckett]

The 4" inlet is stock; the 2. 5" outlet attaches to the elbow.



DP

 

[93D250]

Awesome! Thanks a bunch guys, this makes it easy and me happy

Jake