Intellitronix - Nordskog Gauges - Any Experience

[Neal Cassady]

Anyone have any experience with Intelltronix Products Nordskog gauges. I have been trying to track down the Stewart Warner 82868/82504 0-16 lbs fuel pressure gauge and sender. xks.com is back ordered for a week or two and no one else seems to have them in stock. I'm not ready to spend the $$$ for the Autometer 2261 or 4361. The Nordskog stuff is priced comparably to the SW stuff at xks.com.

You can see the gauge at:
<A HREF="http://www.nordskogperformance.com/k703.html" TARGET=_blank>http://www.nordskogperformance.com/k703.html
</A>

Edited url, **** lesdyxia

Thanks,

Dave D

------------------
2001. 5 QC, LB, 4x4, Auto, 3. 54, Everything but Leather, Bright Silver Metallic, ARE K Series, Diprocal EGT, Boost and transmission Temp in an Autometer Dash Pod, Westin CPS Platinum Step Bars - Black on Stainless

[This message has been edited by Dave D (edited 02-27-2001). ]

 

[illflem]

Dave,JC Whitney sells Intelltronix gauges but don't mention the brand name,they just call them digital gauges. Their price is excellent. I use one for AT temp/w switch for intake temp on my Dodge.
Have four others on tractors for hydraulic temp and one oil pressure gauge that remotely monitors an irrigation pump pressure. No problems whatsoever in 5+ years. Their oil pressure gauge pn# 12JE8988U($36+$22 sender) reads 0-99 psi +/- 1 psi and will work for a fuel pressure gauge
See it here

Went to your link,sure looks like the same gauge to me,but what a price difference. If you want fast service from JCW you need to ask for it,otherwise they can be slow.




[This message has been edited by illflem (edited 02-27-2001). ]

 

[MATT MAN]

Used Nordskog in my jet boats for years and installed them in offshore boats. They were the only 30-120 speedo's available at the time. They have always been a quality piece.

 

[Cooker]

Intellitronix also makes a 0-15 PSI fuel pressure gauge and a 0-100 fuel pressure gauge. Even though the 100psi gauge is listed as 15-100, I spoke with Intellitronix two weeks ago, and they said this is just to keep the 15lb and the 100lb gauge separate. They said the 100 gauge will read below 15 just fine.

Summit sells these gauges too. Their priced affordable at there also.
www.intellitronix.com

 

[Cooker]

Sorry, I didn't click your link, it looks like they are the same.

BTW - The gentleman I spoke with said Summit's pricing is probably less expensive than buying direct from Intellitronix.

 

[Royal]

I got my Intell gauge & sender from Summitt.
If you have a 24V engine with the electric lift pump I would use a 0-16 psi gauge. My friend has a 0-100,and it's hard to read as you only use a small amout of the scale. On the 0-16 you use most of the scale and it's easy to read. This gauge is very steady and accurate. Summits # 1-800-230-3030.

[This message has been edited by Royal (edited 02-28-2001). ]