2nd Gen Non-Engine/Transmission interior ideas needed

[JNeiman]

in the 3500, we have switches located prety randomly throughout the cab. I am looking to organize them on a plate somewhere but would like the help of you guys. I would like to get all matching toggle switches. I need one for a set of aftermarket fogs, aftermarket driving lights, auxilary reverse lights, exhaust brake, possibly the TST powermax3 remote. The truck is a 6 speed and 4wd so there is not as much room down by the floor as in our auto. Where would be a good location? I was thinking about the plate where the trip computer goes for four switches since the truck doesnt have the computer. How difficult is it to run wires up there? Thanks, JOE

 

[ndurbin]

I've been contemplating using my cup smoothie (from geno's) and putting the switches on a plate over the cubbyhole on the driver side, since thats where i rest my arm. Or making a plate that runs along the front of the cup smoothie. Haven't figured out how i want to run the wires. Probably end up going underneath the console, down inbetween the seats, under the carpet and coming out under the dash.



I also thought about the spot for the trip computer (just a cubbyhole since mine is a 94) and still might go that route since the headliner is in bad shape and can run the wires up there for future use and still have the switches on the cup smoothie.

 

[Bob Wagner]

here is a good post to read



https://www.turbodieselregister.com/forums/showthread.php?s=&threadid=19791