Is this a code?

[JGoss]

I was checking for codes on the odometer(push the odometer button and turn key on) and the display said C-CODE 67 89 then 3 seconds later it said 00 00. I did it again and it said 67 91, then 00 00. I did it 4 different times and the last number would be 93,95,etc, but would end in 00 00. Could someone please fill me in.

 

[Pawpaw]

Those are just the instrument cluster codes.



To check for ECM codes:



Start with the key "on" and the engine NOT running.



Turn the key off - on - off - on - off - on. Do it quickly, but not too fast.



Bob

 

[JVolpe]

In case you are interested the Instrument Cluster Codes display after you triggered the Instrument Cluster Diagnostics. The Codes are displayed in the format XX NN, XX is the code and NN is the number of key cycles since the code was set. Here is a list of Instrument Cluster codes.



Instrument Cluster Diagnostic Trouble Codes

01 Airbag warning indicator output circuit shorted

02 Airbag warning indicator output circuit open

03 ABS indicator output circuit shorted

04 ABS indicator output circuit open

05 MIL indicator output circuit shorted

06 MIL indicator output circuit open

07 Wait to start indicator output circuit shorted

08 Wait to start indicator output circuit open

0B BTSI output circuit shorted or open

0C PRNDL switch input circuit shorted

0D PRNDL switch input circuit open

20 Panel dimmer input circuit shorted

21 Panel dimmer input circuit open

22 Headlamp switch input circuit shorted

23 Headlamp switch input circuit open

24 Turn hazard switch input circuit shorted

25 Turn hazard switch input circuit open

26 Panel illumination output circuit shorted or open

27 Courtesy/dome lamp output circuit shorted or open

28 Glovebox/map lamp output circuit shorted or open

29 Cargo lamp output circuit shorted or open

40 Wiper switch input circuit shorted

41 Wiper switch input circuit open

42 Wash/beam input circuit open

60 Passenger door lock switch input circuit shorted

61 Passenger door lock switch input circuit open or short to voltage

62 Passenger door lock switch input circuit stuck

63 Driver door lock switch input circuit shorted

64 Driver door lock switch input circuit open or short to voltage

65 Driver door lock switch input circuit stuck

66 All door lock output circuit shorted to ground or voltage

67 All door unlock output circuit shorted to ground or voltage

68 Driver door unlock output circuit shorted to ground or voltage

69 Passenger cylinder lock switch input circuit shorted

6B Passenger cylinder lock switch input circuit stuck

6C Driver cylinder lock switch input circuit shorted

6E Driver cylinder lock switch input circuit stuck

80 Incorrect odometer value found

81 Remote radio switch circuit high

82 Remote radio switch circuit stuck

A0 Internal module FLASH memory checksum failure

A1 Internal module bootloader failure

A3 BATTERY voltage open

A4 Ignition RUN/START circuit rationality check

A5 TCCM messges not received

A6 Ignition UNLOCK circuit rationality check

A7 VIN checksum error

A8 VIN previously stored

A9 PCI Bus internal failure

AA PCM messages not received

AB TCM messages not received

AC ABS messages not received

AD FCM messages not received

AE ACM messages not received

AF SKIM messages not received

B0 RKE fob battery low

B1 RKE module communication link

B2 Cluster mismatch

00 DONE

 

[Pawpaw]

In case you are interested the Instrument Cluster Codes display after you triggered the Instrument Cluster Diagnostics. The Codes are displayed in the format XX NN, XX is the code and NN is the number of key cycles since the code was set. Here is a list of Instrument Cluster codes.

That's good info. Thanks!

 

[JGoss]

Thanks paw paw. Got code P0514. Seems pretty common I guess. (Battery Temp Sensor)