ISSPRO FP guage trouble

[telliott]

i've had it for less than a year, and it has developed an intense internal rattle that drives me crazy, so i had to remove. Anyone had this problem?



So, i'm in the market for a new one, who else sells a 0-30 psi FP guage. I'm having a hard time finding one in a 2 1/16, and i'm a little skeptical about getting another ISSPRO.

 

[Jeff Knight]

Mine does it also. I have a needle valve in line so I have mine turned off. I need to get a new one someday. We were in your neck of the woods a couple of weeks a go. Nice town. Jeff

 

[WDixon27]

my isspro was quiet till i changed out my mostly dead lift pump and then about a thousand miles later i guess the pump broke in and my gauge started bouncing and after a little while a tick to go with the bounce, i got a isspro snubber and that was way too tight, took about 5 miles for the gauge to come up to pressure (with the diesel insert, the other two it came with were even smaller) so i hit a hardwear store and got the stuff to plumb in a needle valve, i close it till i can almost see it move at idle and it reacts quickly but is silent, i think i may have 15-20 in the valve and fittings to install it, been leak free and silent for a year now, once in a while i need to tweek the setting on it