Here I am

I'VE GOT GAUGES!!!!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

CB antenna ????

gauge installation

Status
Not open for further replies.
My birthday is this coming Thursday, and my wife got me one of the best gifts I have ever received: The gauges I wanted!

I got the Isspro EGT and Boost Gauge, and the Autometer 2 gauge pod to put them in. I guess she couldn't wait until Thursday to give them to me, so I got them on Monday! Have I mentioned how cool my wife is? #ad


Well, I couldn't wait for the next NW BOMB session, so I decided to install my goodies tonight. I'm worse than a kid at Christmas! At the last BOMB session, we drilled and tapped (I should say MikeR drilled and tapped, I watched!) my exhaust manifold for the EGT probe. I used an existing port on the intake manifold for the boost.

All went fairly well. I got everything hooked up and working in about 3 hours. I know, not the fastest time. Then, for a test drive!

I can hit about 20 psi of boost when I mash the accelerator. Also, going uphill at WOT, I can reach 1000 degrees pretty quickly. I think the EGT's would be higher, except I'm running a straight pipe. Cool stuff! Now, the REAL BOMBING begins... ... . I've got a 50 psi boost gauge, I better use it! #ad


------------------
Scott Collins
'98 Ram 2500 4x4 12 Valve Cummins. Slightly BOMBed! #ad

Renton, WA

[This message has been edited by Scollins (edited 01-31-2001). ]
 
Scott... congrats, and good job to your wife! Its nice when they support your habit! Now, you are experienced... and we have a gauge job on the 17th!!!
Hope to see ya then.

------------------
Rob Hanson
1999 "Big Red", 3500 SLT QC 4X4 6 spd, 4. 10 LSD, Braided SS fuel lines, Mag-Hytec Rear Cover, Cummins E-Brake, Blue Box, DD3 Injectors, Banks High Ram and 14cm Wastegated Turbo, All-steel Cowl Induction Hood, Cummins RED Valve Cover, Rhino, Rosewood Kit, Scotty System, SportComp Gauges, TorkLift SuperHitch, Tekonsha Brake Controller, Rear Flood lights, Cobra CB, DeeZee Running Boards, BD 2WD Low kit, Air Lift bags, Hitco exhaust blanket, air horns and a Geno's "I tromped a Ford" decal. Member of BOMB! (WW NW Chapter)

MyPics.com (pics updated 01/20/01)

I'd rather be... .
Cummin than Strokin.
 
cool Scott,
sounds like you got a great wife,you better take her out and show her how firm the back seat is #ad

the one thing I have learned in 21 yrs of great marrage is support each other in all you do.
I had been buggin my wife since 94 for a dodge cummer and finnaly out at work they made her drive the new cummer to the post office and when she came home she told me to go get it now, so that said ,what more can a guy want,life is good #ad
#ad
#ad
.
. KEVIN 2001 eth dee
 
Great... Sounds like ya got an old lady like me #ad
#ad
#ad
Fathers day of 1998 she bought me A spank'n brand new FXDWG #ad
Still waiting for my gauges to arrive... Think the UPS man has a Cummins dodge #ad


------------------
2001. 5 QC,LB,5spd... 4X4 Patriot Blue.
Mother Made Ya, Mother F#@$ YA
 
Don't they call people like your wife "enablers"? #ad
#ad


Just kidding! Have fun and take your time installing!
 
Boy,you are just about as impatient as Rob Hanson! Hehe. Glad to see you had no problems getting them in. 3-hrs is good.

If you're this exited about getting BOMBed,wait until you go to Dyno Days... we'll have to keep you chained down. #ad


-Mike

[This message has been edited by MikeR (edited 01-31-2001). ]
 
Hi Scott, #ad

Enjoy the gauges... .....


Gary... ... . #ad




------------------
01' 2500 - QC/SB, ISB w/Auto, 4X4, 3. 54 LSD, Solid White - Westin Bars, A. R. E. Cap, Bug/Vent Sheilds, K&N Air Filter, Autometer Ultralites Boost/EGT/Trans/Fuel, Custom 4" Exhaust, AutoTransformed DTT TC & VB.


[*]TU Member
[*]NRA Member
 
Status
Not open for further replies.
Back
Top