2nd Gen Non-Engine/Transmission Just Put In Aorder For Dokota Digital Fp Gauge

[VHolloway]

Just Put In A order For Dokota Digital Fp Gauge

if you have this digital gauge please let me know what you think of it.

and how easy is it to install

thanks

vaughn

 

[HookMeUp]

Vaughn, very easy install, good detailed instructions. As far as the operation; it suits my needs.

 

[wlowe]

I've had mine for three years with no problems, works great. Install was fairly easy. I mounted the guage in a donut mount down by the throttle pedal. Check my Reader's Rigs to see how I mounted the sender.

 

[Schlickenmeyer]

I put mine in a few weeks ago, I like it a lot. easy to read, just remember to program it before you finish the install ( you need a wire clipped to any metal ground and about 20 seconds to do this).

And the blinking if low/high pressure limits are reached it grabs your attention. Needle gauge just can't do that.

 

[dieselshu]

Dakota Digital FO pressure gauge

I have had mine for 5yrs and its worked flawlessly, love the low pressure flash.



Dave

 

[Timbeaux38]

I have had mine for a little over a year and love it. Mine is mounted in the cubby with the plate from Geno's and Works really well. Install went smooth and programming is easy

 

[rono]

I've had mine for almost 5 years and love it. Also have the egt and boost guages. Like the way the lights dim when turning on you lights. Light color matches the factory good.

Ron

 

[VHolloway]

what tools will I need for the in stall?

real happy to have the fass 2 in the guy that did the job did not put the pre filter in the one thats go in before the pump will this heart my pump