K.C. Diesel Club

[One Old Dog]

I think that the K. C. Diesel Club is meeting at Fuddruckers on Noland rd between I70 and 40 HWY on May the 5th at 5pm.

The post is on the kc diesel club web site so I thought I would post it here just in case some have missed it . Any change I will post it.



Later Joe

 

[BigYellowIron]

Joe,



I'm going to try to make it there if my girlfriend lets me



Adam

 

[d90boy]

What the URL for the KC diesel website? Sounds like something I need to investigate.

 

[GOODE11]

too late

I always check this forum too late. Anybody know if Cummins open house is still on over at Parvin rd. ?



Hope is was a good meeting!



One of these times I'll make a get-together.

 

[BigYellowIron]

OOPS Sorry I did not make it.



I was in the neighborhood, But had to much stuff going on.



Yes the Cummins open house is still at cummins on Parvin Road on the 18 of May



Click the link in my sig for the web site.



Adam

 

[d90boy]

I plan on making the open house event at Cummins on the 18th. Who all's coming? Joe I haven't talked to you in forever, is Lacy around still?



Kyle

 

[One Old Dog]

Kyle were have you been. Lacy and I were talking about you the last dyno meet and we were wondering where you were because we have not heard from you in a while. I hope all is well. Looking forward to talking to you.



The K. C. Club meeting went well, we only had 4 people show up but maybe next time we can get some more. We had one chev show up he said that he would try to make it to the next dyno meeting.



I got the 4" exhaust in today and it sounds good and it drop my egt 200 degrees so all is well . Now all I need to do is put the dd11's in i would like to get them put in before are next dyno meetiing but i need some help I will put them in I just need someone around to make sure I do it right the first time.



I think Greg is going to check with M. C. Racing and see if we can have one some time in June.



Later Joe

 

[BigYellowIron]

Originally posted by One Old Dog

Now all I need to do is put the dd11's in i would like to get them put in before are next dyno meetiing but i need some help I will put them in I just need someone around to make sure I do it right the first time.

Joe, I would be glad to help you sometime, Just give me a yell



Adam

 

[One Old Dog]

dd11

Thanks adam for your help . lacy said that he would help to so the way i look at it the more the Happer i will be. I will look and see what dates would be good and give all a call . Little John said that he wonted to come a watch so i may have a cook out and all can come. I wll let little John do the cooking.



Thanks again Joe

 

[d90boy]

Glad to know I've been missed. I just put DDIIs in my new ****box, it's not too bad a job. The only special tools are the inch-pound torque wrench and a midget 19mm wrench is nice for the injector fittings on the back cylinders. I've done 3 installs so just yell when you're going to do it. Seems like we were talking about doing 275s over a year ago! Good to see you're getting around to some injectors. The 4" exhaust is nice too, glad you've done it already, I hate taking the factory exhaust junk off they must put those clamps on with 3/4" impact guns.

 

[One Old Dog]

Injectors

d90boy,



Thanks for the advice on the 19mm short wrench I can see were that would be needed. I will go to NAPA and see if I can get one.



We were talking about 275s but when I call Piers he talked me into the DD2s I thought I would leave the old dodge alone but after a while the bug will bite again and here we go. Oo.



I see that kat diesel has his truck runing good he hit over 500 at may madness so he is on the right track.



will time to get some work done at home talk to you later Joe