Kansas City Area Dyno Meet!!!

[Floor It]

Yogi, the exit is Johnson drive,then go west on johnson drive about 1/8 mile and that is merrium dr. Then go north on merrium -about 1 and a 1/2 miles or so-until merrium curves back to the east, which is right at an entersection (stop light) and then go about 100 ft and look for the trucks on the north side of the street. Clark I always bring beer I imagine as long as it doesnt get carried away and we keep the cans or bottles picked up he wont mind.

John

 

[Bad340fish]

John



BigYellow hasn't posted on this in awhile??

 

[Floor It]

yeah I know, CALLING BIGYELLOW! WHERE ARE YOU!, I think hes still going to school and I know he works late nights. HP360, not sure how many trucks will dyno but you have plenty of time on the dyno, last time I dynoed it cost 50$- I think,cant remember but Adam should know.

John

 

[yogibear]

Hey john, do you know the exit # to get off of I-635 So. , to get on Merriam Dr. ?

Larry

 

[BigYellowIron]

Here I am!!



Sorry I have been really busy lately, I'm in town untill march.



I have been reading the post every night just not posting.



I cannot wait untill sunday, looks like it is going to be a nice day!



I want to dyno to see what the difference is now after a few other mods!



See you all sunday!



Adam

 

[BigYellowIron]

Oh yea!



I thing the dyno Is 56 bucks for two pulls.



I don't think that beer is a problem as long as you use your comon sence like John said.



In the past people have dyno tested air filters and chips that have slowed down the day doing this. I think it would be better if we did not do these things unless we see time as not being an issue.



I think that if there is any first gens there they should go first then if there is any powerchokes they should go second and finily the second gen bad boys.



This makes the dyno guy's day easer and so we do not have to see him get all p i s s e d off.



Adam

 

[Floor It]

Larry, off of 635 going south look for Merrium Dr, it's after Shawnee DR. I dont think there are numbers only names on the signs. The other directions are for people coming in on I-35,they need to look for Johnson Dr. Then Larry when you get off on Merrium Dr -off of 635- you turn right on merrium or west and you go 3 or 4 blocks and its on your right or north side,if you have problems call my cell # see-ya there

John

 

[yogibear]

Thanks John, I hope I can make it. I need get my trk. dyno'd, see what this B-1 did to it.

Larry

 

[Todd T]

Well I dont think i will make it



our buddies at UPS wont let me pick up my package from their center today. i have to wait for them to try to deliver it on Monday.



what a bunch of BS. my new SBC will be sitting in a van all weekend about 10 miles from my house. and i can't get to it.



Oh well, I guess there will be other Dyno Days that will come and go, like the last two i missed have.



HP360 I was wanting to compare our trucks, i think im right there with you in HP. I thought it would be a good fair fight, but looks like its been canceled.



have fun gang and enjoy the weather

 

[HiPerf360]

Todd call me ASAP... I might be able to help you getyour clutch... My number is 918 810-7060

 

[Floor It]

Hey Adam,what other mods you got done, cause I've got an idea on what your next mod should be,well here it goes-I've got a big drill and some bits, we could drill 6 more holes through the top of the cylinder head-1 per cyl- and add an extra set of injectors- You Dont Need No Stinkin Extra Valves!-I was thinking of a set of stage 8 injectors,we give them a good coating of j. b. weld to seal them up in the head and then mount the VP44 pump on the rear-end housing and use a belt to hook it up to the drive-shaft,I'm affraid that if we hook it up to the water pump that when you- Floor It:-laf - it will cause the steering wheel to come off, so this this way the extra power can be controlled,as drive shaft speed increases so does pump pressure and power. We will use High pressure brake hose to connect the pump to the injectors. Now DON'T tell anyone or it might get out and on the tdr boards and then diesel dynamics might hear about it and beat us to it and get all the flame and glory. :-laf so whatcha think

John

 

[Don M]

Floor it wrote: "then diesel dynamics might hear about it and beat us to it and get all the flame and glory. so whatcha think"



You got the flame part of the sentence right.



Don~

 

[Floor It]

OOOOP'S:--) adam the cats out of the bag now!I told you not to tell anyone:-laf :-laf

John

 

[BigYellowIron]

Bring the drill and the vp44 i got a spare set of injectors.



Lets do propane and nitrious too!:-laf



Shooting for 900hp and 2000 ftlbs



Adam

 

[Floor It]

Thats a resonable amount of power to have:--) , I'll bring the stuff, it shouldn't take more than an hour to do, I think?Oo.

 

[yogibear]

Hey John, I can't make it, I have to deliver a sold unit to Temple, Tx. Mon. morn. I know you guys wanted to see the B 1, but duty calls! I have to make a few bucks for more mods. John keep in touch, we'll get together.

Larry

 

[Floor It]

Thats a bummer Larry, oh well I do know what you mean,I own my own buisness and you have to work sometimes when you dont want too. We'll hook up soon,you have my # so when it looks like you might have some time call me, be safe on your trip.

John

 

[KatDiesel]

Just as a fair warning... .....



There are going to be some "non-diesel" type people there. Mainly some mustang guys, and other "Street racing type people". Some of them have seen me dyno, and seen me at the dragstrip, so don't be surprised when some people without trucks show up They are very interested at seeing what these trucks can do since they have seen/heard about me and Greg on the dragstrip.



Also I'll be bringing my truck... . I "might" dyno, we'll see how its running I guess.



John... ... bring your tool kit please..... I wanna hook up and unhook a few things to find out which device is causin me heartache, since its supposed to be so nice out. I'm tired of just driving with my injectors.

 

[Bad340fish]

I did some work on my car today and considered dragging it up there to see what it would do. But my new carb main body needs to be tapped to accept my WOT switch for the nitrous so I couldn't put any decent numbers up. This 360 is a tuuurrrdddd without some JUICE See ya Sunday



Kat... mind if I take a ride in your DTT equiped truck?? Been curious to see what they were like

Clark

 

[KatDiesel]

Originally posted by Bad340fish

Kat... mind if I take a ride in your DTT equiped truck?? Been curious to see what they were like

Clark

Sure, no problem. Just be forewarned its not running 100% like I want it too. Let me hook the COMP back up... ... ... right now just running on my injectors. Too bad ya couldn't go for a ride when I had the Kwikspool HX40 on there... that was a blast.