KDP Questions

[Greenleaf]

Peen(ing) the aluminum on the inside diamater of the pin bore. This is performed after you have pushed the unseated pin back into home position. Some folks like this method and it's probably pretty effective.



GL

 

[btoscano]

Now that I am trying to put the pump gear back on, I am having some difficulties. It seems that the pump drive is under some tension and when the gear is removed, it moves a little. How is one supposed to rotate the gear/pump drive to correctly fit the cam gear correctly? Is engine rotation the way to do it, or is there a trick I am missing?



Thanks,

Brian