Engine/Transmission (1994 - 1998) Killed KDP

[pete97]

I killed my KDP today. It took just under 2 hrs with the JIG and a few breaks. Thanks alot tp0d for the JIG.

 

[tp0d]

Good to hear another engine is protected. No problems with pin interference? My dad's 99 had a pin that was 1/2 out into the screw hole the jig makes. Luckily we had a really thin pick that pushed it back into place. Got lucky there. .



-j

 

[pete97]

No problems. At first we thought it might have been out because the drill stopped. We were using a cordless drill and the battery was low. When it got to the end it stopped because of low power and the bur at the end of the hole. Started to drill again and it went right in. No problems.