"killer pin" jig available

[Bill Littlefield]

I would like to be on the list for the jig. Maybe we can do a group of them in Central Oregon?

Bill

------------------
Bill Littlefield
95 XCab, 2500, LB, 5sp

 

[Dr.Bob]

Robert Allen, 926 Crist Dr, Billings, Mt 59105 Thanks for the post... ... ... .

------------------
96 2500, 5 speed, Fuel preporator, K&N, Dr. performance injectors, Horton, No cat, Holes in muffler, TST #11,AFC spring kit and going broke with the price of fuel.

 

[Bill Lins]

Me, too! 400 E. Milam Wharton, TX 77488

------------------
Bill Lins Wharton, TX 98 2500 QC SLT,12 (the CORRECT # of)valves,NV4500,3. 54 LSD,Manik grille guard,Semi-Psychotty Air,Amsoil everywhere, Reading aluminum utility body and bumper,Optima yellow tops- silencer ring & muffler stolen.

 

[illflem]

My experience with the hole saw for the Phscotty that passed around is that with shipping you can expect about one week between users. Now with 23 posts on this thread you're looking at six months. It's time to organize jig parties in each state if you want to see the jig in a reasonable amount of time, any organizers? What would help is if the jig's current wereabouts is posted so that folks near it could e-mail, take the drive and share. When I had the jig 8 trucks were done in four days with one member driving about 200 miles.

[This message has been edited by illflem (edited 05-19-2001). ]

 

[nwohsy]

put me on the list. matthew mcnichol 47 tommy court mahopac ny 10541. hopefully i'll get one around november, but before the first snow... .

 

[Andy Redmond]

another me too. .
Box 261605, Plano, TX 75026 or
2325 Wooten PL. Plano, TX 75025

 

[Noseridorr]

I will need the gig to, or if there is one around Santa Barbara, San Luis Obispo, Ventura, or LA counties let me know and I will drive down. Jason Orr 7015 Vista Del Rincon Ventura, CA 93001

------------------
1997 Xtra Cab, Long Bed, 5 spd, 285/75 on 16X8, waiting to bombed.....

 

[HEMI®Dart]

Put me on the list too.

 

[TSjodin]

Please put me on list. I will be gone on vacation till the 11th of June. Hope that dowel pin stays in place, could make for a lousey trip.

Thank you
Tom Sjodin

 

[RBrush]

Jig Dittos here too. Maybe I can get a jig party going in this neck of the woods. Will look around for a better location as I'm very limited for space here. Thanks

Rich Brush
10008 NE 41ct
Vancouver, Wa
98686

 

[JStordahl]

VC or whoever is monitoring the list: I did the washer tab fix, so I can be removed from the jig list. Thanks anyway. I figured it would take forever to get the jig.

 

[E-9]

jig

I would like to use the jig also. I have two trucks needing the mod.

 

[Paul]

Put me on the list also!!