Here I am

KORE Leveling Kit -- More than 3"??

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

new trucks expensive!!!!

BFG AT's on Chrome Clad Steel Wheels

Status
Not open for further replies.
Hello all,

I installed a KORE leveling kit on my '03. I had measured the distance from the ground to the bottom of the fender, it was 39" before starting the installation. The install went fairly smooth, but after it was all done the new measurement was 44. 5" from ground to bottom of fender. What gives? I was looking for only 3 - 4" at the most, not 5 inches. Also, I now get noise vibration out of front drive line at 45mph.

I plan on contacting KORE but I would like to know if there are other members that have had any of these issues? So if there is anybody out there that could try and help me with this I would be appreciative.

Thanks, Leon
 
So, come to find out, KORE sent me the wrong springs -- they sent me the 5. 5" lift coils instead of the 3" ones that I ordered. They are overnighting me the correct ones, thankfully. So note to any future KORE leveling kit installers: on the side of the coil spring, it says ALPHA passenger/ALPHA driver (3" coils) verses DELTA passenger/DELTA driver (5. 5" coils). Back to the shop... Maybe KORE will show up to help me. . I won't hold my breath.
 
I would have had them send you the back to match at their cost :) But alas, you don't want to go that high :(
 
Status
Not open for further replies.
Back
Top