lamp out indicator

[E7mack96]

My lamp out indicator came on Christmas eve. Yet I have not a light out. Anyone experience this? and if so, what would the remedy be?



E7

 

[JHardwick]

here ya go, plenty of reading!

 

[E7mack96]

says no matches???

 

[jelag]

This is a common problem..... all it takes is a little resistance because of a bad connection to light the "lamp out" indicator... . You need to pull all the bulbs and clean the connections and put some white grease, vasolene, dieletric grease, on the connections and put them back together...

 

[JHardwick]

says no matches???

here try this, I know there has been tons on this subject

 

[ropinfool2]

I'm having the same problem, both with the lamp out and the no matches! I'll try the plug deal. Thanks. JR

 

[RDyson]

When mine started giving me problems, it was one of my brake light bulbs. I couldn't check them by myself. Drove me crazy. The wire on the side of the bulb had imbedded into the plastic not allowing a good connection. I was just looking at the filament and they were good. So check the socket end for problems.



Randy