Competition lattest page for the lil red

[83 crew cab]

here is the latest page of updates on the lil red for anybody interested time to get started on the body work :{ George



http://www.geocities.com/blown72rr/twinturboedcummins.html

#ad

 

[Jim Fulmer]

Ok here are a series of questions.



1. What turbo's are you going to use



2. What cooler are you using



3. Are you bending the cage yourself,if so what bender so you

have.



4. Were did you get the cool intercooler boots



5. Is the cage mild steel or chrome moly... . tigged or migged



6. Are you going to have under 20K in it, not counting the initial

buy.



7. What pump are you going to use and aren't you running mod.



8. Shoot some pics of the rear set up

 

[Fireman Dave]

Looking good George!Oo.

 

[83 crew cab]

ok see if I can get all of these right



1 ht3b and hx40 ( 16 or 18 housing with ever works on the dyno



2 overvalved intercooler



3 yes it s a jd square model 3 http://www.jd2.com/



4 http://www.samcosport.com/distributors.asp?country=usa



5 mild steel tig



6 not sure if I came in under the $18,000 goal after bying tooling or not



7 p7100 out of a 96 auto truck work over by dave diesel yea running mod to much sfi stuff that nobody makes to run 9. 99 for this year and I am not sure if it will run faster than 11. 00 anyway



8 #ad

 

[Jim Fulmer]

Sounds good, I was asking about the rear as you have a 4 link setup and I'm running Caltrac's with a few twists (extra stuff) here and there, but I haven't made it to the track as I have a leaking headgasket under hard boost when it's hot.



Jim

 

[83 crew cab]

I was going to run cal-tracs at first but then I figured that if I was going to go this far 4-link would not be that much harder



let me know how the cal-tracs work out

 

[HEMI®Dart]

Awesome

LOOKS GREAT! You are doing a real nice job.

 

[Cooker]

Great work George!

 

[Sled Puller]

What transmission and gear ratio, George?

 

[Jim Fulmer]

let me know how the cal-tracs work out



George I should have it to the track testing at the end of the month after I fix the head gasket, but it's like cheating from before as I put a locker in also..... I'll report!



Jim

 

[83 crew cab]

Gene A&A and 3. 54 gears

 

[HoleshotHolset]

... give us a close-up on the TIG welds... that way I'll know if I'm heading in the right direction with my welding.



Sweet work... . keep it up!



Matt

 

[Todd T]

is it just the pics or are those tires really that close to the frame?



what's the plan of attack if so?





nice job BTW

 

[83 crew cab]

Matt I dotn know if you want to see my welds up to close



Todd the pic is a little desiving there is 1. 5 to 2 inch between the tires and frame

 

[HoleshotHolset]

George:



Your welds can't be any worse than mine..... heck I've only had my welder a few weeks!



Matt