Attention: TDR Forum Junkies 
Thinking I'm in the market for a LED light bar, and like the specs on the 5D's. Having a 3500 and utilizing the space in the bumper is where I'd like to put one.
Question is, although I've done alot of thread searching, I would like to know what will actually fit (don't want to drill the tow hooks) and what specific brackets were used to mount it. I've been eyeballing this one,
5D 32"Inch 420W Curved Cree Led Work Light Bar Spot Flood Offroad 4WD Truck ATV
on eBay, seen here: http://www.ebay.com/itm/272109641159?&autorefresh=true
Just not sure it'll fit and from some of the things researched apparently even a 30 inch would take some fabbing of brackets to work. Heck, even one website says only a 28 inch bar will work with standard brackets.
If 32 inch is too big, and 30 inch is just squeaking by, please post both your light bar recommendations brand, size, and the specific brackets used (and their sources). Am hoping to do this for $200.00 or under. Thanks in advance!!
Question is, although I've done alot of thread searching, I would like to know what will actually fit (don't want to drill the tow hooks) and what specific brackets were used to mount it. I've been eyeballing this one,
5D 32"Inch 420W Curved Cree Led Work Light Bar Spot Flood Offroad 4WD Truck ATV
on eBay, seen here: http://www.ebay.com/itm/272109641159?&autorefresh=true
Just not sure it'll fit and from some of the things researched apparently even a 30 inch would take some fabbing of brackets to work. Heck, even one website says only a 28 inch bar will work with standard brackets.
If 32 inch is too big, and 30 inch is just squeaking by, please post both your light bar recommendations brand, size, and the specific brackets used (and their sources). Am hoping to do this for $200.00 or under. Thanks in advance!!
