leveling kit question???

[RobertP]

has anyone heard of this leveling kit? its on ebay, Dodge Ram 2" Leveling Lift Kits 1500 2500 3500 / 94-05

LIFETIME GUARENTEED SUPERIOR CONSTRUCTION! SHIPS TODAY! Item number: 7998802170 i dont know how to post a link quite yet so if anyone could i would appreciate it. i just want to know if that is a good kit or not?

can anyone suggest a good kit if this is not one?

 

[NLamke]

http://cgi.ebay.com/ebaymotors/ws/e...998802170_W0QQfromZR40QQfviZ1&item=7998802170



There's the link. I haven't heard about this company, but I have heard and read here that you want to make sure the bolts are grade 8, like these are. I personally have the Revtek kit, which had problems with the bolts being too soft originally. My kit has the grade 8 bolts in it, and I have been happy so far. If I had the money, I would put at least the KORE leveling kit on, if not one of the full systems. I've heard nothing but good things so far on these systems.

 

[VStahl]

it looks like the rough country spacers, www.roughcountry.com, I believe. I personally prefer replacement springs like the skyjacker D25's ($150) or the like. I dont care for the spacer look in the wheel wells.

 

[FullSack]

caveat emptor



I wouldn't do it - you may end up with death wobble :--)

 

[KBertetto]

Looks like a decent kit. I've had the Revtek on for about 20k miles with no problems, give it a shot, it's an easy install.





Bert

 

[RobertP]

just looked at the tuff country kit and its only $50 more so i think im going to go with that just because i don't know who makes the other kit.

 

[JRunge]

Tuff Country

My dealer installed the 2" Tuff Country spacers and I have not had any problems. Make sure that you have it aligned when installing the spacers.



Good luck;



Jim

 

[LOtero]

Got those spacers on mine no problems. they bolted right in, no death wobble

and the construction looks real good. all the welds are real nice. they also shipped real fast had them in a week.

 

[Diesel Nut]

I have the steel rough country spacers on and the install was a breeze. I also used 2" blocks in the rear for a full 2" lift, keepoing the factory rake so my 5th wheel (2100 lb pin wieght) don't make me look like all those retards draggin their bumpers with the nose in the air. That just wouldn't do the dually justice. Anyhow, 70K miles on them, not a problem. BTY - if you make sure to paint everything you put under your truck black (spacers, shocks, ect. . ) like I did you will get a lot of "what pakage did you order to make it look like that?" questions! I do all the time! It's kinda funny sometimes. Good luck!

 

[Fitchconstruction]

After snapping 2 sets of bolts on Revtec spacers. Not fun replacing in dad's driveway and it snapped the shock tower bracket. Love the Kore springs. Spend the money ONCE!! I might not get the HD again though. Helps with the plow.

 

[milehigh.o.]

How much is the KORE leveling kit?