2nd Gen Non-Engine/Transmission leveling kit

[Skid]

What is the best product to use for leveling a 2001 HD? How hard of a job is this?

 

[pwknapp]

Just get a set of Skyjacker "D25" springs and change them out. I did it so it can't be to hard. :-laf

 

[.44 mag]

I used a set of spring spacers from a company called "Jack-it". They have an internet site. The 1 1/2" steel spacers worked out just great to even out the added weight of the winch bumper I installed.



My truck already had the optional extra heavy "snow plow prep package" front springs, so I had no reason to swap them out for aftermarket.

 

[Smokin_Monster]

www.topguncutomz.com has a 2" steel leveling kit (Spring spacers) for about $100. I have been really happy with mine. It took 2 to 3 hrs to put on and an alignment. They come with good instructions too.

 

[JPittinger]

KORE, no question. Heavy duty longer front coil springs make a wowie difference.

-JJ

 

[amnewsom]

I went D25s and ranchos, next I will do a different shock but I like the springs and height they give. I dont tow that much so I prefer the level look over the nose down. But overall install was easy I would disconnect the shocks first then sway bar and drop the axle as far away as you can. While you are under there replace the steering setup with a T-Style.