Lift Kits for 2wd trucks?

[Doc Tinker]

Check out my post here:

https://www.turbodieselregister.com/ubb//Forum3/HTML/003143.html

I'm still investigating the options, so hang in there. I'll post what I find and tell you what I do with my truck.

Doc

 

[Texasdeere]

Thanks for the help Doc.

 

[Texasdeere]

I know Fabtech specializes in 2WD lift kits, but they are all for 1/2 ton trucks. Does anyone know of a company that makes some thing to lift the front end of my 2500 about 2" or 3".
( I don't want the front end ride quality to change from stiffer springs. )

Thanks in advance... MH

------------------
Erik F.
2001. 5, Silver, Quadcab, Longbed, SLT, 24V, Auto, 3. 54 LSD, 2x4, Tow and camper packages,
(Add ons) Pioneer, Husky Liners, Tint, Diamond Plate Tool Box, and Rail Guards, OEM Bedlinner, OEM 4x4 Mud Flaps, K&N, Geno's Breather Vent Catch Can.
(Wish list) 4" Exhaust, Low stall converter, Built transmission, Banks Power Pak.

 

[Doc Tinker]

Moto-Head

Take a look at the above linked thread again. I've posted some responses from a couple of lift kit suppliers.

Doc

 

[Texasdeere]

Thanks again Doc,

The best solution would be if someone made
either balljoint spacers (shims of some sort), or spindles to achieve the lift we are looking for.
I think the spring spacers would be ok if one didn't exceed 2" of lift. Any more and I think you start exceeding balljoint travel,
and it will pull down on the sway bar a little to much.