Engine/Transmission (1994 - 1998) LIft pump hose size?

[wcjp]

Tomorrow I'm attempting the fuel supply/return lines. I'm also going to install LarryB's contacts. Should I also replace the soft line at the lift pump? What size is it? Any other soft lines to replace since I'm at it. I'm going to use 3/8" for both supply and return. Thanks.

 

[illflem]

The return line is 5/16", don't think 3/8" will work, it will probably leak at the ends. Best way to get at the hoses is from above after removing the entire fuel filter housing.

 

[Joe G.]

Take off the two nuts that fasten the master cylinder to the booster. Then lean the master cylinder toward the fender. That will make more room to work on the fuel hoses.