Lift Pump ?

[Rattler]

I know this has been beaten to death, but where is the best place to get a stock type lift pump?And what can i expect to pay? I noticed yesterday that i could not hear mine when i first started the truck so today i went out and cracked open one of the fittings on the filter housing, bumped the starter, and no pump. I tried an old starter trick of tapping the pump with a hammer and it is working again for now.

 

[LSMITH]

Get it at Cummins and it will be about $140.

 

[Whitmore]

Rattler, if you want to stay stock go to Cummins and get their latest and greatest #3990105 for a cost of $142. 66



It will bolt right up, I dont know if you need the wiring harness or not, look at your stocker and see how the wiring is , if it clips right in to the bottom than you will not need the harness, hope this helps,... ... ... ... ... ... Kevin

 

[Neal Cassady]

You Guys are Lucky

Our local Cummins shops are very proud of the new part number. They want around $165. 00 in the Baltimore/Harrisburg/Philly area.



Dave

 

[pwr2tow]

On a 1999 you will need the wireing harness unless the pump has been replaced before with the 3990105.



Ron