Lights for the DiPricol gauges???

[drawson]

Anyone know where I can get replacement light for my Boost gauge. They are a really small bulb.



Anyone have a source???

 

[HerbW]

Drawson,



I would take the bad bulb to the local automotive store and see if they can match it. I don't mean in Walmart or some minor parts house but a real parts house. Radio Shack has a real bevvy of bulbs of odds sizes also. If all else fails, e-mail Mark at TST Products and I'll bet he would know. If it's simple and you get a part number , let us know and where you scored it. I also have the same gauges! Good luck, Herb

 

[Deezul1]

Drawson

Those Diprocal gauges are made in India and USA either the boost or EGT is made in India and the other one in the the USA, cant remember which. When I got mine I called the ph# in the directions and thats what I was told, may have something to do with hard to find bulb.

 

[drawson]

HerbW, I have done both things I sent the bad bulb to the local Car Quest and they where unable to match it. I also E-mailed Mark at TST and haven't heard nothing back yet.

 

[HerbW]

I'm bumfuzzeled

Hello Drawson,



I guess we'll hope somebody else reads this to help out. I know tis must of came up before. Let me Know. Herb

 

[KPancake]

I purchased my gauges from Enterprise Engine Performance. You might want to give them a call. Hope this helps.



Chris



www.enterpriseengineperformance.com

 

[KPancake]

Oops, wrong address.





Try this one.



www.enterpriseengine.com

 

[The patriot]

Made in India, and USA? Sounds like my Isspro's.

I e-mailed Isspro about 6 months ago. Still no reply.

I can almost see my pyrometer at night. The boost is impossible to see.

Eric

 

[HerbW]

Isspro?

Hi Patriot,



I had ordered all ISSPRO gauges in April and cancelled my order earier this month due to unfilled orders of "EV" gauges. I live in the Portland, Oregon area and have called them alot and only once talked to Vaugn at ISSPRO instead of his voicemail. The gauges looked excellent and could be, but if they never send them how would you know. ISSPRO now says it will be mid September before the gauges will be sent. I ordered from TST and SIX DAYS later they were on my porch! This included a weekend. I'm impressed! Has anybody looked at the bulbs for a part number? I go to FRY'S Electronics here and they are a huge store and I would be glad to look for bulb numbers there if someone has them. They just now are buying out Egghead Computers and the web sales and these bulbs in the future might be purchased on the web. If they had the right one, maybe we could buy a box of them and sell them for cost on our site here. Just an idea. Herb

 

[rrl989]

Bulb repl.

If the bulbs are common throughout the different manufacturers,

try Westach (www.westach.com) ? they sell bulb kits for a few bucks. The bulbs are clear and tiny, the wires are slid into a tube,

you add color with a boot that goes over the bulb.



Good Luck,



Ron

 

[HerbW]

ISSPRO Catalog

While looking at the ISSPRO catalog they I. D. their three bulb type they use as: T-10,T-5 and T-6. 5. When you look at each gauge they sell in their catalog it also lists the matching bulb type to go with it. This catalog can be seen on the D. I. S. website or e-mail ISSPRO and they will send you one. I wonder if these bulb numbers mean anything in parts jobbers books? HerbW

 

[The patriot]

I wonder if that's the candlepower?

To put it nicely, my lighting sucks!!

Eric