Looking for camper support ideas

[Polarbear]

I am wondering how others are supporting their slide in campers when not on the truck? I used to let mine sit around on its hydraulic jacks, until one of the seals went out and it partially collapsed. No damage to the camper, but I have been told that I should put something under it when in storage. I considered cinder blocks, but maybe someone else has better ideas?

 

[Dean Upson]

When I had a truck camper, I made up a couple of Big saw horses. I think I made them out of 2x10's. Worked great.



Dean

 

[RAPID RICK]

4 55 gal. drums with a 4x4 across them works great. Don't have to jack

camper up so far to load it either.



Rick

 

[TowPro]

I made a frame using 4X4's for lets, and 2X6's for the sides.

then I made "X" supports out of 2X4's to keep the legs from folding over.



Its pretty light. I can stand inside the frame, put a 2X4 in the middle and pick it up and carry it around.

 

[Dane]

Saw horses under the floor front and back with the camper jacks down on the corners for stability.