Looking for Differential fuel presure gauge....

[NKoch]

I am not in a big hurry over this but I would appreciate any help that I can get in this. I am currently looking for a pressure gauge setup to display differential pressure readings between incoming and outgoing pressures from the fuel filter. This would be for a 3rd gen. Has anyone heard of doing this or done it themselves???

 

[Mhannink]

i don't know who makes it but theres that dual in one guages that u can get one that reads pressure/pressure that would work

 

[Matt400]

Maybe here:

http://www.differentialpressure.com/dph200p.htm

 

[Vulcan]

With electric gauges some guys use two senders, one gauge and a switch to go from pre to post senders.

 

[cyborg]

I've seen aircraft, dual pressure in one gauge, gauges.



Check out the compatability table on that website.

 

[Matt400]

A differential pressure gauge is an interesting idea, we used them in the Air Force to determine when refueling equipment needed a filter change. I suppose your thoughts are the same. For safety sake it would be a good idea to use 2 isolators with the above manual gauge so you could get it inside the cab.



So at WOT, what psi would you do a filter change?