Looking For External Molding

[Matt42]

As I mentioned in an earlier post, I'm getting ready to get my truck painted. Almost all of the molding and rubber will get replaced. I have located sources for many of the easy-to-find stuff, but some are elusive. Main door weatherstrip and more are on order from Geno's, for example. Rear window seal is available, if it's needed.

But I can't find the roof molding that seems specific to the 2-door club cab models, nor can I find the (formerly) resilient plastic pad that adheres to the bottom of the tailgate. The pictures show the tailgate and where the cab roof molding used to be. I'll also need weatherstrip for the rear seat vent windows, but I don't yet have pictures to show. Does anybody have any sources for those? Thanks in advance.

 

[Iron Duke II]

LMC Truck should still carry it.

 

[Matt42]

LMC Truck should still carry it.

This was all I could find under "Molding" for the second generation trucks at LMC:
#ad

 

[Topzide]

@Matt42, Did you try here? https://store.mopar.com/oem-parts/m...tMjUwMCZ5PTIwMDEmdD1iYXNlJmU9OC0wbC12MTAtZ2Fz
They say to contact them, worth an email.

 

[Matt42]

Topzide: For some dumb reason, it never occurred to me to check model years that would interchange. I followed your link and it looks like that part will work. I'll contact them. Thanks.

 

[Topzide]

@Matt42, You're welcome. I figured since my '01 has that same panel, look at other options.

 

[Joe Mc]

Matt,
I believe the tailgate plastic is called an "applique". I reused my old one when my truck was repainted as well as the side (rubber bumper guard) strips. Worst part was removing old adhesive tape from the rubber & plastic parts. Lots of dry rubbing and WD-40