Looking for NV4500

[driverswanted]

If anyone out there can help I'd really appreciate it. I'm trying to find a pullout 4x4 Dodge gas version (smaller shaft diameter than Diesel rated NV4500) of the NV4500 for my Cummins 4bt conversion project. I know I need the 23 spline count rear end. I'd rather not pay for a core charge if I can help it.

I'm ready to drive about 500 miles radius to pick one up.

I live in the Cleveland area and have not found any NV4500's in the Cleveland or Columbus areas.

 

[Redram 1]

Call 1 724 455 6100 ask for Jim.

 

[Joseph Donnelly]

Check 800-std-tran. You may be better off with the HD version with fully splined mainshaft due to the vibrations of the four banger.

 

[driverswanted]

Thanks REDRAM 1. I'll try that number today.



Thanks for the reply Joeseph. I'll try that number. I've been steering toward the standard version because the heavy duty version went from the 23 spline to a 29 spline. I'd have to loose my transfer case and find another one with the 29 spline count. More $. Even converting the 29 to a 23 spline would require some cost in a new output shaft and the labor in changing over. If I'm missing some easy switch over let me know.

I'm trying to stay under $1,000 for the drivetrain and part of that is a ~$220 cost for the GM 12" clutch bellhousing to nv4500 Advanced Adapters plate.



Thanks again for the help.

 

[driverswanted]

Thanks Redram 1 and Joseph. I have my NV4500 ready to pick up next Saturday. Just need a clutch to replace the worn out one now.