looking for rear wheelhouse shields for 2002 RAM 2500

[Blade Benson]

I've been searching the web for rear wheelhousing shields (fender liners). The only ones I have found are at the "factory Chrysler parts" in Barstow FL. Price is reasonable @ $79 each but Shipping the shipping is $234 to Walnut Creek, CA.
Are there any other options that you guys know about? Any help would be appreciated.
2002 RAM 2500 4x4 5.9 Cummins 6.5' bed

 

[BSeyler]

https://www.lmctruck.com/1994-15-dodge/de-1994-02-steel-bed-panels-and-components

No idea of shipping cost.

 

[Blade Benson]

Thanks, LMC was $60 more for the 2 shields and only $70 shipping plus a $20 / item "over size part charge ($40) so in total only $60 less than "factory Chrysler parts". But it is a $60 savings.

 

[crabman]

Go to the parts department @ your local dealership and order the part. I got mine by doing that and didn't have to pay shipping.

 

[Signal73]

I have some on the east coast, probably not too cheap to ship.

 

[JDiehl]

I pulled mine from the salvage yard years ago for $50. Maybe look around there?

 

[Terry]

I wouldn't expect that there were any aftermarket suppliers, I wonder if the LMC are OEM? It seems like they were an option when I ordered my truck.

 

[Blade Benson]

Thanks for the replies, I took Crabmans advise and went to the local Chrysler dealer, it was $100 less then having them shipped from Florida. $293 out the door with tax. But that was better than the $80 each w/ $234 shipping. The parts guy told me I need 10 plastic rivets ($12 each, but found a pack of 25 for $12 on Amazon) and 10 screws part number 6506974AA. I could not find any information about these. Anybody got an Idea of the Size / length of these ? do they have the "U" clip on them ? Any info would be helpful.
Thanks,

 

[Timd32]

Says:
M6x1x20

 

[Blade Benson]

Thanks for the help and suggestions, purchase the liners from the walnut Creek dealer, and made some steel plates with bolts going through them. Worked great.

 

[JMcCoy]

I removed mine years ago but plan to reinstall them when I replace the bed. I believe my clips were different, but it's been a long time. How do the install with the posts attached?