Looking to install A BHAF

[RonaldCollier]

Hi! I am looking to install a BHAF in my 92 Dodge 3/4 ton Diesel. But I was hoping that I could see some pictures of this already completed. I need to get some ideas on what to do. Can anybody help me out?

 

[DieselTweaker]

I dont have any pic's



but I took some heavy rubber and lined the inner fender, and just put mine in there by it's self

 

[bgilbert]

Check my Readers rigs album, BGilbert's trucks. I have some pics of the BHAF setup.

 

[jcarey]

Her's a link to TDR member nick leinonen's instructions. It's for an 04, but might be worth reading. It list some filter numbers.



https://www.turbodieselregister.com/...&highlight=bhaf



The prefilter can be ordered from Outwears...



http://www.outerwearsracing.com/splashOLD.html



At this site, you can get intake tubing and elbows at a very good price...



http://shop.airflowonline.com/Merch...ategory_Code=IT



Hope this helps.



Jim

 

[JLEONARD]

If you send me an e mail to

-- email address removed --

I can send you some picture files of a nice mount. . including the dimensions for fabbing it up. Something I got off of another forum.

Jay

 

[HRajagopal]

No one has a 1st gen and can host pics of their setup??

 

[Lock93]

Over on DTR, there is a template from a fellow that goes by Bumpytruck (I believe). I used his template, a sheet of diamond plate alum, and rented a hole saw to make my "Old Smokey" copy. Got everything (filter, clamps, 4" alum intake tube, 45 degree rubber boots) from Air Flow supply in Spokane, WA. Cost about $80 to buy everything and took about a 1/2 day to build.



http://www.dieseltruckresource.com/pics/showphoto.php/photo/2814/password//sort/1/cat/500/page/1



http://www.airflo.com/

 

[swankmetal]

there are some pics in my readers rigs of my mount. might help. i did the same as lock93.



dave

 

[vhainesxx]

WHAT ARE THE DIMENSIONS FOR YOUR AIRBOX i'D LIKE TO BUILD ONE

 

[swankmetal]

the top link in lock's post has the template that i used. i just added a little corner piece to mine. figured a little extra support wouldn't hurt anything.



dave

 

[PToombs]

What are you guys using for air filters? I took my stocker and laid it on the fender. Are yours bigger than stock?

 

[PToombs]

What are you guys using for air filters? I took my stocker and laid it on the fender. Are yours bigger than stock? Thanks, pete

 

[swankmetal]

Are yours bigger than stock?

just a little. most people use a napa 2790, i think. it has a cone that you can clamp your filter hose to. i used one that's a little bigger. i can find the part # if you want, but i wouldn't recommend using it (lot's of extra work, and probably not worth it).



dave