2nd Gen Non-Engine/Transmission Low beam headlight go out when tilt wheel is moved

[BJesik]

Sorry, put the wrong title in my original post.



When I put the tilt steering wheel in any of the 3 lowest positions my low beam headlights go out. In the highest of the 4 positions, all lights work fine. Also, the high beams work fine in all positions. Any help would be much appreciated. Thanks.

 

[Bob4x4]

Pull the steering colum shrouds off you will probably find a pin pulled out of the switch or starting to fatigue.

 

[BJesik]

Thanks for the info. Are you referring to the shrouds around the tilt lever and turn signal lever or the large shroud below the steering column? And what switch should I look at to find the pin?

 

[Bob4x4]

The multi-function switch

 

[MDale]

I had this same problem, mine was a loose connector at the bottom of the steering wheel under the covers. I think the connector was blue.

 

[BJesik]

Thanks a bunch for you help. The problem was actually a loose wire in the plug of the multifunction switch. Crimped it down, reassembled it and everything works fine.