2nd Gen Non-Engine/Transmission Low Budget LH Seat Cushion Replacement

[mwilson]

Install recline lever.



See why you have to slit the cover and use the Bias tape, if you don't you will rip it the first time that you tip the seat ahead.



Looks great, seams line up and everything. Someone with a real sharp eye may notice what you have done but most folks will never notice it is a right hand cover and cushion on your driver's side seat.



Questions??? Ask away.

Yes, it was completely FREE. !!!!!Oo.

 

[SRath]

I'm strongly suggesting you slide a piece of carpet between your new foam and those cheese-slicer wires or it will not last as long or feel as good.

 

[mwilson]

Scott,

I plan to do that very thing in the spring. I will be stripping the interior for cleaning and refurbishing, the carpet strip and foam treatment for the bottom cushions are tops on the to do list.

I was very short on time and didn't have any rug handy when changing the cushion and needed the truck first thing in the morning, just could not stand to drive it another mile the way it was.



I have done a couple 2nd gens in the past and have already had to do the Mega's seats this past summer, did it in a campground that was handy to a Wal-Mart one sunny day. Bought the special foam and a beautiful floral rug doormat to hack up for raw materials. :-laf



Used a picnic table for a work bench... ... ... ... ... Oo.

Other campers do give you a second look when you start mauling the front seats out of your pick-up and setting them up on the table... ... ... ... ... ... ... ... ... ... ... ... .....



Mike

 

[PToombs]

Good job Mike! Now if I can find a tan leather righty I'll be all set!