Engine/Transmission (1998.5 - 2002) Mach 6's and Silver Bullet with High EGT's HELP!!!

[SpicyJam]

now I know where the rumor started :-laf what a joke

LOL, I really hope you were talking about the "bowl burner" remark. I really don't think a set of injectors 7 @ . 016 at 128 degree stays in the bowl..... spray is on the rim, and you know that... ... ... as far as the pic that is running around I ran across it... ... ... . and can not find it anywhere now. So rumor or true until you start answering some of the PM's I have sent I will start asking them out in the open... ... ... . if you would like I will resend them all. So take it easy tiger... ... ... ... later Jim.

 

[Bob Wagner]

stock injectors and edge box on an 04

 

[SpicyJam]

stock injectors and edge box on an 04

Na that was not the pic, I hardly go to NW site, member yes but this was a pic of a 24v 2nd gen clearly stating Mach injectors. Only thing wrong with the slug was the bowl edge was rolled over, and it is not the pic that Fullmer had up of the 370's spraying outside the bowl area on a 12v either. I am telling ya a couple of us saw it, because I got a call to go look and now I can not find it anywhere. It was here or CF, there is a bit of a diff when a stock injector fails but when made to purposely spray that high is another.

So until I find consider issue dead, because I can not get any answers from you, nor can back up what I saw, I know what I know and I will leave well enough alone. Although I would like some replies back in a pm of some of the concerns I have with things, know what I mean... ... ... ... . thanks Jim.