Engine/Transmission (1998.5 - 2002) MAP and IAT fittings?

[NoSeeUm]

I am guessing thqt they both are the same. But I was hoping some one knew for sure before I went forward.



I am thinking of adding a second MAP and relocating / bombing the IAT.



TIA;

Jim

 

[Gary - K7GLD]

My MAP is 1 1/16, and as I recall, the IAT is 13/16 - both require a deep socket, a spark plug socket might work on the IAT...

 

[NoSeeUm]

Thanks Gary, but I was more wondering about thread sizes.



For example could I swap the IAT and MAP sensors in the threaded holes in the manifold and would they both still fit?



Jim