Map Sensor

[J_Wright]

Data Link Connection - not Map Sensor

Anyone know where a Y connector for the map sensor could be purchased. I'm trying to plug in the Edge COMP and the Cummins RoadRelay4. I called Edge and they do not sell one. I also checked with Geno's and a local parts store. Any thoughts?

 

[SRadke]

Don't both of those units have provisions to work on their own? Why can't they be hooked up in series like stacking boxes?



-Scott

 

[J_Wright]

I'm probably showing my ignorance here (newbie), but I only see one port to plug both units into. Don't you have to have multiple ports for stacking to work?

 

[SRadke]

Usually in the harness for the device will have both a male and femal plug. You unplug the stock harness from the MAP sensor and plug the new harness into it. Then the stock harness will plug into the other connector on your new harness.



This is how the fueling boxes recieve data from the MAP sensor and feed false data to the ECM.



-Scott

 

[J_Wright]

My ignorance is coming out again - but hey - I'm beginning to learn. I confused the map sensor with the data link connector. It is the data link connector that I need a Y connection for.

 

[SRadke]

I can't help you with the data link connector. I jumped past the second generation 24 valves so my knowlege is limited. Sorry.



-Scott