Engine/Transmission (1998.5 - 2002) MAP Sensor

[DSaiter]

What size socket do I need to remove my MAP Sensor? Thanks for your help

 

[ceastmen]

32mm

I saw a similar post and that was the answer 32MM deep socket.

 

[RBunch]

A 1-1/4" Deep will also work just fine. .

 

[nps]

I used a 1 1/4" boxed end wrench - worked fine but couldn't get much throw on the wrench. The MAP is in fairly loose - shouldn't be too hard to get out and don't torque it down going back in.