Engine/Transmission (1994 - 1998) Massdiesel has moved as of 11/01/04

[massdiesel]

As of Novemeber 1st 2004 Massdiesel has moved its location 2 miles away to a better location. We currently were at 84 rockwood rd Norfolk Ma 02056 now we will be at 32 Production Rd walpole Ma 02081 Walpole Industrial Park . The phone has

a slight change the local number will be changed from 508 528 6127 to 508 660 7093 but the 1 800 477 6127 will remain the same in both shops Thank you all Tdr members,customers and freinds for making this possible. We will be back in full operation on mon the 3rd of november. I also wanna thank all the TDR guys that are making it possible to do this. WE only made the decision a week ago to move and only allowing a week to renovate and turn a former body shop into a performance trans shop in a week and move is incredible and wanna send a special thanks out to a few who helped when we opened Massdiesel a few years ago and showed back up with their tools. Batman,Straightsix,Wheaties(Stoner),Pigpen(The Dawg),YO(the new Dawg) and all my freinds and family for sticking buy me to make this happen. Also a early thanks goes out to evryone that has said we will be their for the move on the 1st so thank you again to all of you.



Scott Hovey

Massdiesel Performance

32 production rd Walpole Industrial Park Walpole Ma 02081

508-660-7093 1-800-477-6127

 

[PGaither]

Hi Scott, my name is Phil (I live in Buzzards Bay, Ma. ), bought my first Ram CTD last June, and I love it! I was just going to ask if there was annyone in Mass. that worked on Diesels... ... . now I know about you! Do you just do trannies, or all work on the CTD? Please let me know if & when you might sponsor a KDP event, or if you you could help me with te KDP fix on my truck? I am a "handyman" by trade, let me know if you need any help with the new shop (I do carpentry, light plumbing & electrical work, just about everthing), only thing I can't help with is liffting of heavy objects, as I had a Hernia opp. a while back, and am trying to avoid annother one. I might be able to help durring the week, or Sat. the 1st in the afternnon (as I have a job to do in the Mornning), if I'm done with work early enough... .....

 

[98rammer]

yep, Scott does it all. give him a call and you can get your KDP squared away (jig method). now and then there's wrench days held too in which you could do the KDP. i highly recommend him!



Tom

 

[BigBadDodge]

Congrats on the new shop Scott, wish I was there to help.



BBD