mega cab drive shaft??

[badboyztoyz]

i have a 2006 mega cab short box srw i want to put a i piece drive shaft on it i was reading thru post apon post and cant get striaght answers truck is a 2500 single rear wheels mega cab short box with 5. 9 cummins and a G56 6spd the part number i found for this is 52123162 AA. can anyone tell me if this is correct and if so does this come with yoke and flange and u joints most pics i see they come with everything just want to make sure one this

Thanks

 

[seafish]

i have a 2006 mega cab short box srw i want to put a i piece drive shaft on it i was reading thru post apon post and cant get striaght answers truck is a 2500 single rear wheels mega cab short box with 5. 9 cummins and a G56 6spd the part number i found for this is 52123162 AA. can anyone tell me if this is correct and if so does this come with yoke and flange and u joints most pics i see they come with everything just want to make sure one this
Thanks

That is the part# of the driveshaft that I used on my 2005 QCLB G56 4x4, which should be the same as your MCSB g56. It ships as a complete unit. Be sure to use Loctite on the bolts when you install it.

 

[Southbound]

Badboy-

I replaced my drive-shaft years ago and can tell you its one of the best mods I have ever done on my truck!!!! Note: My truck is exactly like yours. As far as the part number is concerned I will verify tonight when I get home and post it. And yes when you purchase it ... ... ... . it will come with new yoke and u-joints. All you have to do is remove the carrier bearing and mounting hardware from the split shaft and then install your one-piece. Again you will be amazed at the difference it will make with replacing the split shaft.

Southbound

 

[dodgediesel91]

Thanks a lot for the help guys can't wait to get it on and see how much better it feels and thanks south bound if you cud let me kno that would be great
Thanks