Engine/Transmission (1998.5 - 2002) Mega Turbo Whistle - 15min PVC Intake...

[USMCBay]

Here are some photos of the Air Intake I just completed - I can't take credit because I first saw it here on TDR...



Here are the photos of my new Amsoil 4510 ($83shipped) and PVC ($30) Intake...

1. ) Stock Elbow from Turbo...

2. ) 4. 5" or so Male to 4" Male fitting - Thinner Sewer PVC (not standard shc40)

3. ) 3. 5" piece of 4" Sewer PVC

4. ) 4" 45° Elbow Sewer PVC

5. ) 4" 90° Elbow Sewer PVC

6. ) Amsoil 4510 - ($83shipped)





#ad




#ad




#ad




This is the Rubber Grommet that used to hold in the stock Air Box... I just pulled it out and used a Razor to cut it off... I did this for 2 reasons - I needed to shim it up 1/8" or so to make it seat right and to ensure there is no air leaking in that is unfiltered.

#ad




I placed the sensor on this side to allow the cooler air to pass over it from that side... it may be a moot point but from what I know about Gassers cooler air advances your timing? Not sure but it might work on our 24v'rs

#ad




Painting will come soon.

 

[JDiepstra]

Cool. Loud?

 

[Stanbery]

isnt that a 3rd gen cr?...

 

[JDiepstra]

isnt that a 3rd gen cr?...

Yes. It appears the OP posted in the 2nd gen forum. Probably an accident.

 

[USMCBay]

Yes. It appears the OP posted in the 2nd gen forum. Probably an accident.

CRAP!



Sorry - Sorry... I got click happy.



I just got everything to do my 12v this evening. So this application is easy to do as long as you have a stock elbow that will fit... I can't remember what my 99 had...



My bad!



Admin - please help me to do an about face to the 3rd gens (I have my hat in my hands)

 

[USMCBay]

Just got it painted and reinstalled. I shaved down and sanded all of the factory molding spikes, Stamping, and mold creases... I may paint it a darker metallic or flat black now that a have a plastic adhesive base.



I used a Hammered Metallic for Plastics & PVC...



Also flipped my sensor around to have the wires go under.



#ad




#ad




#ad




I will look into fabing up a shield soon.