Here I am

Michael Brolin's CB Mount

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Convert a Ball

0-60 PSI Fuel Gauge

Status
Not open for further replies.

Alan Reagan

TDR MEMBER
Recieved my CB mount from Michael Brolin last week. Yesterday afternoon I decided to install it. Much simpler than I thought. The bolts were easily accessible under the center seat and the mount went right in. About 45 minutes for the complete install including mounting the CB on the new mount. Cleaning up the chips from drilling was the worst part cause I had to get out the shop vac. Thanks for a good idea with great implementation. Professional quality and good price. Good job, Michael.
 
Does anyone have a picture they can post of this mount? I am ready to purchase a CB and would very much like to see the mount and mounting position. Thanks in advance. Steve.
 
pic of brolins mount

This is the older style but it should be the same but a little to the left of where this one is here. I have a stick and mike said he was going to make one style so thwere might be a slight difference.
 
Call The Police!

Hey Eric, someone stole your CB!!!!

:eek: :eek: :D :D :D :D



Seriously, not a day goes by that I don't appreciate my Mike Brolin CB mount. Thanks Mike. :)
 
Mike Brolin mount?

So where does one purchase this CB mount from? What are the dimensions, depth, height, width? Do I have to drill into the florr to anchor it ? Thanks
 
You can go to members and do a search for Brolin, from there You can email Him. You don't do any drilling to mount the bracket, but, You do need to drill into the bracket to mount the CB to it.

Mike's bracket is installed by loosening the rear and temporarily removing the bolts under the front center seat. Tilt the seat back, slide the bracket between the seat and pedistal, and replace & tighten bolts, that's it.

It's a great product at a reasonable price.
 
Status
Not open for further replies.
Back
Top