Molex plugs for 2010 oem fuel filter??

[seafish]

Does anyone have a source for, or part # for, the plugs that serve the WIF light and fuel heater on a 2010 oem filter canister??

 

[TFucili]

Go to the Waytek web site. They have every conceivable Molex and every other plug style.

 

[firefighter_2000]

Got a photo?

 

[seafish]

Can post one tomorrow. Thanks.

 

[TFucili]

Generally, Molex plugs are ID'd by number of rows x number of pins. i.e. 2x4=two rows of four pins.

 

[seafish]

plug pix

OK, here are some pix...type, part # or source anybody??

 

[firefighter_2000]

Looks like two different connectors.
The top appears to be a Delphi GT150 connector - eBay item number 360809082475

The bottom appears to be a Deutsch Connector - eBay item number 191025856244

You can get both through waytekwire, but you have to buy the minimum parts numbers (I.e. - 100 pins, 8 bodies, 50 locks etc), so the eBay ones might be the best for small quantities.

Hope that helps
Craig

 

[seafish]

Looks like two different connectors.
The top appears to be a Delphi GT150 connector - eBay item number 360809082475

The bottom appears to be a Deutsch Connector - eBay item number 191025856244

You can get both through waytekwire, but you have to buy the minimum parts numbers (I.e. - 100 pins, 8 bodies, 50 locks etc), so the eBay ones might be the best for small quantities.

Hope that helps
Craig

Thanks, Craig, that was quick!!!

The second pic definitely seems to be the Deutsch connector you found, but I am unsure about the first one, at least by looking-- the pins on the oem can are flat, not square, it also does not seem as if the interlock is the same..any way to be sure?? TIA

 

[firefighter_2000]

Not really sure. I just bought some Delphi gt150s for a project, and they look similar, especially with the flat pins.

 

[TFucili]

I was just on the Molex site and it doesn't appear to match anything I could find there. Can't tell from the photos, but are there any numbers on the plugs or their mating connectors? I have IDed connectors by googling the number to get to the correct series.

 

[mwilson]

Seafish,

I was trolling about in Cummins, they may be available there. Please PM your truck vin or esn to me and I will pick away at it tonight.

Or e-mail it if you like.....mwilson@freightlinerofmaine.com

You may have supplied it in the past but I can't seem to find it.


Mike.

 

[seafish]

Mike, unfortunately I do NOT have a vin for the truck, becuse it is a 2010 fuel filter canister and my truck is a 2005 with differnet connectors.

But thanks to ALL of your suggections, I DID find the WIF connector-- it is a Deutsch DT06-2s

http://www.retrofitparts.co.uk/deutsch_electrical_connectors/deutsch-dt06-2s-connector.html
http://www.waytekwire.com/item/38170/2-PIN-CONNECTOR-PLUG-AT/

And the heater element connector, which IS a Delphi GT150 series 2 pin, Delphi part #12052641

http://theelectricaldepot.com/index...id=279&zenid=f81b16514e0ac31ee834b800241ac9bf


Those numbers are for the PLUGS that fit INTO the wif and fuel heater connectors on the 2010 fuel filter canister.

Thanks again for all the help!!!!