Here I am

Engine/Transmission (1998.5 - 2002) My 1/4 mile time Last night

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
Ohh and start modding your truck and go to diesel 101 before you come on this forum pay your 35$ and talk some **** about a subject you have no idea about
 
We were up in Edmonton Canada at the Annual August Blackout. There were many fast trucks up there and most were running Silver Bullet Turbos. The times they were running was as low as 11. 5 in the 1/4 mile. Some were running mid to low 12 sec. 1/4 mile runs. They were ALL running with out air filters. They said the Silver Bullet will over pull a AFE Stage 2 intake and yes we now agree. We took our air cleaner off and wow what a difference. Now we must start looking for a larger intake system. Thanks
 
So has anyone been up to Cecil and seen this guy run?



Brett I am not doubting your turbo. I have seen your stuff in action. But have you seen this truck run? I am having a little trouble seeing a truck run a 12. 7 weighing 7240.
 
I'll probably be at Cecil this coming Saturday. My painter is trying to get his Camaro into the 9's.



I'm aiming for low 14's for my truck, but I doubt it.
 
You better get your glasses fixed because my truck is 7300 pounds with 37's on it and can run 12. 6.
TravisG said:
So has anyone been up to Cecil and seen this guy run?



Brett I am not doubting your turbo. I have seen your stuff in action. But have you seen this truck run? I am having a little trouble seeing a truck run a 12. 7 weighing 7240.
 
TJSHOTROD said:
You better get your glasses fixed because my truck is 7300 pounds with 37's on it and can run 12. 6.

ALl you guys have to do to make someone believe your claims is post up your time slips.
 
I can post my slip as soon as I get my truck back but that slip could be from anyone it does not say year and make.
SKargo said:
ALl you guys have to do to make someone believe your claims is post up your time slips.
 
My glasses are just fine bud. I still can't see it. 7300 lbs 6 in. of lift and 37 inch tires. That truck has got to be in the upper 700 horsepower. Does your truck get 23 m. p. g. towing 15k too?



If you ran a 12. whatever bud more power to ya. Keep on trucking. But just like I said in the beginning its kind a hard to beleive.
 
It made 673 I think in the Diesel Power mag. challenge. No it gets like 15mpg and I don't tow anything. All I was saying is these trucks get in the 12's all the time at 7300 pouds. :rolleyes:
TravisG said:
My glasses are just fine bud. I still can't see it. 7300 lbs 6 in. of lift and 37 inch tires. That truck has got to be in the upper 700 horsepower. Does your truck get 23 m. p. g. towing 15k too?



If you ran a 12. whatever bud more power to ya. Keep on trucking. But just like I said in the beginning its kind a hard to beleive.
 
We will be at Weekend On The Edge at Rocky Mtn. Raceway in Sept. We will be running our trucks there. Barry (NADP) is bring down 12 trucks from Edmonton Canada. I was figuring out how much the fuel would cost for the 12 trucks to travel 1000 miles to SLC from Edmonton. Several thousand dollars! If you would like to see the same trucks run as fast as I have said, then be there. Our trucks run very fast also. It's a very good event with a lot of support from all over the country. There should be some very impressive trucks coming up from texas. I will let you know who a little closer to the event. Thanks
 
BrettWilliams said:
We will be at Weekend On The Edge at Rocky Mtn. Raceway in Sept. We will be running our trucks there. Barry (NADP) is bring down 12 trucks from Edmonton Canada. I was figuring out how much the fuel would cost for the 12 trucks to travel 1000 miles to SLC from Edmonton. Several thousand dollars! If you would like to see the same trucks run as fast as I have said, then be there. Our trucks run very fast also. It's a very good event with a lot of support from all over the country. There should be some very impressive trucks coming up from texas. I will let you know who a little closer to the event. Thanks



Another thread jack here but Brett, you happy with that 4" exhaust and all the other mods? I've always thought the 5 and 6" exhausts where way overkill. The most power I ever squeezed out of my Gen 2 was 480 though so who knows. Sure seems alot easier to get the big numbers out of these CR's. thanks,Ken
 
yeah kinda hard to get a time slip thats not yours seeing how theres only two copies of every run and i believ they go to each driver lol Ill do my best to be there friday, I am drag racing at the buck saturday so if I make it to cecil it will be early, gotta keep the girl friend happy, dinner plans in Bel Air at 7:30 you know how that goes
 
Status
Not open for further replies.
Back
Top