Engine/Transmission (1998.5 - 2002) my dyno #s

[JMachemer]

well last week i took the truck to SGS (was Kauffman's) and got my truck on their dyno. I paid $ 80 so i think their price went up? I actually got to do 4 turns.



Edge Comp off - 214hp 428tq



and 3 runs with the comp on 2x5 - my pump wire is not tapped

best 249hp and 555tq. 35hp and 127tq over the stock run



i wanted to get some base numbers before i put on the SP62 and my Mach 4s. I am still waiting on the injectors, but i guess good things come to those that wait I am also thinking about tapping that pump wire just to see if I can reach 500hp the next time I make it to SGS - I never went to a Spring Fling or Fawl Brawl, but i hear they are good events.



anyone want to give me some estimates what kind of numbers i should be putting down when i go next time?

 

[FDNYMOPARGUY]

My '02 ETH with edge EZ on #2 setting with just a BHAF and no muffler gave me 265 hp and 595 tq

 

[OPoole]

Edge comp F1 mach 4s and 62mm turbo should be 480-515 range. With wire tapped

 

[KDoerr]

Got mine Back from the dealer and she pushed 290 hp and 1000 ft



Keith

 

[SnoKing]

Got mine Back from the dealer and she pushed 290 hp and 1000 ft



Keith

Something does not look right about those numbers. HP is low or torque is high. SNOKING

 

[Joe Mc]

Tap that wire! Give it a spin to see what it'll do, then do the other bombs. My truck did 387 hp and 720 tq with just F-1. 6s and a comp box on 5/4 @ last Fall Brawl. Can't wait to get the 5s and a 64/14 . . .

 

[KDoerr]

Something does not look right about those numbers. HP is low or torque is high. SNOKING



Ya thats what I had thought but they say that is normal is it?

Keith

 

[Bob Wagner]

better add studs to that list

 

[NSarabia]

Hey JMachemer



If by chance you're still in the market for some F1 Mach 4's I have a set I just pulled from my truck. They have 6K on them and they performed flawless. I needed bigger sticks for the twins. Give me a call if you're intrested. 254-702-6936 (Nate)

 

[bbodammer]

well last week i took the truck to SGS (was Kauffman's) and got my truck on their dyno. I paid $ 80 so i think their price went up? I actually got to do 4 turns.



Edge Comp off - 214hp 428tq



and 3 runs with the comp on 2x5 - my pump wire is not tapped

best 249hp and 555tq. 35hp and 127tq over the stock run



i wanted to get some base numbers before i put on the SP62 and my Mach 4s. I am still waiting on the injectors, but i guess good things come to those that wait I am also thinking about tapping that pump wire just to see if I can reach 500hp the next time I make it to SGS - I never went to a Spring Fling or Fawl Brawl, but i hear they are good events.



anyone want to give me some estimates what kind of numbers i should be putting down when i go next time?

We have similar trucks and I dynoed before adding the sticks and put down 370/790. This was at floor it diesel. We will be heading down there in feb. so I will get to run it again. Also going to throw a smarty in the mix to see what happens. John at floor it said I should be sitting at about 510 or so. I just want the chart to hang it in the garage so my duramax/powerstroke friends can read it and weep :-laf

 

[JTruelove]

Are you interested in selling your 1. 6's?

 

[RustyJC]

Got mine Back from the dealer and she pushed 290 hp and 1000 ft



Keith

Yep, those numbers look screwy for a 24 valve. See my signature.



Rusty