My Nelson Muffler Install

[brista]

I installed one of the Nelson 51" mufflers in place of the CC and factory muffler. I am pleased with the install. With the Cat removed the install goes quite easy as far as lining things up goes, I only had to make one small angle change at the back to get things where I wanted them. Parts required were the 86131M muffler, a 48" and a 12" piece of 4" tubing (cut to length during install), the clamps were reused. Three hangers hold the muffler up and these were very easy to fabricate.



-



-



-



-



-



-



Slighty louder and deeper than the factory at idle and no noticeable difference at cruising speed.

 

[AMassaro]

Job well done. I love my Nelson. After awhile, she'll really sound like a semi truck. On another note, I can't believe you were able to reuse the stock clamps...

 

[brista]

Job well done. I love my Nelson. After awhile, she'll really sound like a semi truck. On another note, I can't believe you were able to reuse the stock clamps...

Yep. . a little WD-40 and they spun right off with the impact. I had new ones at the shop but just threw some anti-seize on the threads and put em back on