N.E 13Th ~B.S Session / Wrench / Cook / Plans for Summer

[ToolManTimTaylor]

TqT Is lookin to fill the Lot again and I'm lookin to Loaf

Being there is the Sand drags goin' on ( :{ I WANNAH GO :{ ) but I along with some others I am sure Can't make it (Or leave the post unattended that long anyways) So Which Witch is which ... ... Aw nevermind what dates are good?



I saw the 13th is tennatively good and standing however we can still change dates as much as swingin it up two weeks ahead if that helps?



There are alot of air horns that need to be installed as I have seen in the P. M area and the Golf Cart needs a set put on as well.



*We need to have a Summer Bash at Hooter's Berlin , soon So all the boys can hang MA , NY , VT , ME The works so plug that in the back of the crainium (The thing beer and alcohol effects) and I will start makin the Phones ring that need to ... . ring. *

 

[stg2500]

I probably will not be able to make it on the 13th. :{ I will be packing for vacation. Let me know if anything is finalized for the summer bash at Hooters



There is one less set of air horns to install since I finally finished mine on Sunday. All I can say is :--) .

 

[TORQUE THIS]

STG, gotta fix that sig now



Sorry ya can't make it, hope to see ya soon!

 

[ToolManTimTaylor]

Man I would Luuuuve to find an HX 40 kickin' round for saturday My egt's (And achin gut) are killin' me I swear the truck just plain ol' refused to cool off tonite.

 

[TORQUE THIS]

AND...



What ya gonna do with that HX-35 after ya put in that 40... HUH????

 

[HoleshotHolset]

I'm up for anything... . especially if there's gonna be beer there! The fact that there will be wings and other 'eye candy' also makes it all the more attractive.



See you all at the next one... . I'm going up to the sand drags on Saturday. (spectator)



Matt

 

[tntway]

pusher pump

hey i'm in for saturday... ... still got my pusher pump to do.



tim... was gonna tell we need to do hooters... . after we can cruise the pike... ... ... woo hoo... . them stuck up business owners would think its an earthquake.....

 

[Mactruck]

Well it looks like I'm going to have to bag the sanddrags this weekend. I'll be heading down to Virginia & Maryland on Sunday and don't want to drive to Maine and then down to Virginia.



However my new (used) PDRHX35/14 was UPSed Today from Buffolo - second day air. It will be here Friday and I could use a hand installing it.



Mind if I drop by?

 

[TORQUE THIS]

As Bob would say...



COME ON DOWN!



As usual I will be there by 8am, as for TMTT, we will have to make the usual call and wake him up

 

[HoleshotHolset]

:-laf



That's typical of Timmy... .

I'm usually the 1st guy there... . hangover or no hangover.

It's all about the dedication! (so much for that... since I'm going to ME instead of CT on Saturday... )



Matt

 

[TORQUE THIS]

trader

 

[tntway]

yup... i will definately be there sat morning... ... . also need to say sayonara to a puke bottle... ...

 

[HoleshotHolset]

Traitor??!! Man, talk about harsh words!



As for the puke bottle..... don't use those two words in the same sentence when Timmy first gets there. Not unless you'd like to see a real-life re-enactment...



Matt

 

[therabbittree]

hey. . im gonna show up. . i may be wanting to do a intercooler install. . do you have a mig welder there?. . if not i may bring mine its a 110v... . and my tubing cutters hehe... there are truck pulls local to me at the Ulster county fair in New Paltz NY august 1st thursday night 7 pm. . any of you ct guys wanna pull?. . i pulled my dodge last year... i may try to get the truck going this year too. . mummn... ... later

deo

\x/ hillfolk!

 

[Wheaties]

Hey Deo!



truck pulls in New Paltz? Might be able to make

that after work... keep me posted.



Matt

 

[TORQUE THIS]

Deo, all I have is a small arc welder, if ya need me to bring it, let me know.



tntway, whatever ya pick up for the puke bottle move, make it double and I'll pay ya back on Sat.



I have a fuel pressure gauge to install, anybody have a banjo bolt for the sending unit???



I have DD1's, but I have to wait to put them in :{

 

[HoleshotHolset]

Truck pulls on a Thursday night?



Man, you NY folks are killing me! I don't get outta here till 6!! GRRRRR!!

 

[therabbittree]

yep y'all truck pulls in new paltz its all mainly yocal yokels haha in bascially stock trucks so no crazy michellizerd rigs or any thing but last year my friends and i had a lot of early dodges and there were a bunch of 2nd gens and 24vers there too and flowerchokes ha and gassers its pretty cool though... also coming up this season...

August 10th sat, big rigs pulling series chenego county fair out in norwich ny by oneonta delhi area... pretty cool bad ass if you've never seen em.....

August 11th Sun, Diesel drags and truck show in quaker city drag way in salem ohio right across the pa line. . bad ass also. . im racing my vw and camping out over night incase any one wants to come along ??? (matt?) dorings truck will probably be there stacked and jacked and the rest of the DDRA...

Sept 1st sun, Montgomery county fair , in fonda ny 30mins west of albany on rt 90 thruway, big rigs pulling series good show!!

Sept 14th sat, US trucking nationals, truck show and drags in englishtown nj... this one is the biggest on east coast!!

Sept 29th Sun, Coastal diesel drags and truck show , epping nh, bad ass day also...

Oct 11th my weeding hahah we are having my friend drive us freom the church to reception in his new 2002 kenworth 900L heheh bad ass!!!...

phew a lot of dates to type. . im attending all of the above events if any wants to car pool etc... lets make a showing!

i need to order 12v p7100 gear housing, and assorted parts to convert my rotary to inline, 4k gov springs, 60lb valve springs, power steering pump/vacuum pump, tires, new yoke and ujoints, and a set of 6 " stacks hehe... my truck with #4 cam plate , 370 injectors and enterprise delivery valves should haul ass! (i already have those parts !)

as for this saterday. . im gonna hold off on the intercooler but i think i will do a injection pump swap hehe i got my piers pump back... i think after that i will definately need a intercooler or twins. . i have been pulling 29-30lbs of boost and up to 1400 plus degs before i let up and thats with the small pump hahaha

im gonna show up after the purdue free lobster deal heheh so about 12 or 1pm... .

later

Deo

hey wheaties i'll bring the truck pull flyer for new paltz

 

[therabbittree]

hey torque this what size it that banjjo bolt?. . i don't have a24v ha but i have a box full of asorted bosch banjo bolts from my vws i'll bring em along too... later deo

 

[TORQUE THIS]

Deo, I am not sure what size they are, bring them with ya, hey ya never know