Navigation Radio and Satellite Radio

[Travisb]

I have a new 03 on order and am having the RB1 Navigation unit installed. Does anyone know what other hardware it takes to receive the satellite radio? Installation kit/receiver, etc????

Thanks

 

[jzaremski]

you'll need the satellite receiver and the antenna. The RB1 can support the factory Sirius module directly, so nothing else should be needed if you use the Chrysler satellite receiver. If you use an aftermarket receiver, you'll need an FM modulator and controller.

 

[Task125]

yup,

I have nav radio,and sirus. did not install sirus yet,there install kit wants you to drill holr in the roof:--) don't know if I want to do that .

 

[jzaremski]

I have nav radio,and sirus. did not install sirus yet,there install kit wants you to drill holr in the roof don't know if I want to do that .

try placing the antenna on top of the dash, and see if your reception is reliable. Sometimes you can get away with that.

 

[Task125]

I will most likely put it on the roof, I will need a few beers first though.