Here I am

Need early 04 fan clutch info

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Pyro/boost gauge and pod

Got a good diagnostic light show on the dash. What's it mean?

Status
Not open for further replies.
Can anyone definitively tell me if my 04 Cummins 5.9 24v with A/C has whats considered "reverse" rotation fan? I would think it is, since the fan spins opposite of the engine. Basically, the fan spins counterclockwise from a mechanics view facing the radiator standing in front of truck, and fan spins clockwise from the drivers view inside the truck.
Do I have a "reverse" rotation fan?
 
I never thought about that because for me I only wanna buy an OEM Cummins fan clutch and by the VIN get the right one.

Many problems with aftermarket clutches in the past were reported here at the TDR.
 
Yes Ozy I get it, and I prefer the MOPAR but lots of guys have also had success with say, the NAPA clutches and I am merely considering trying one at this point. Its strictly financial. Dropped a ton here lately on various things. Also, I've found a guy who has a couple from Oreillys new in the box that he'll sell me for $50 each so I figure they're worth a shot. They are Oreillys part # 3282 but I still need to confirm whether my fan clutch is a reverse rotation or not. Thanks for any help guys.
 
Yes, your fan turns CCW, opposite the crank. Here’s your belt diagram.

2A239C75-5D36-46D6-9D39-702775A0B0C8.jpeg

-Scott
 
Yes Sir I know which way it turns as was stated above. Just didn't know if that was indeed considered reverse rotation.
Anyhow, I found out Oreillys sells two Hayden fan clutches. Both are reverse rotation. Heres the thing. One is part #3281 and is apparently for early 04 Cummins.
The other is 3282 and it is for 04.5 trucks.
Can anyone tell me what the difference is between the two clutches? I had never heard early 04s vs 04.5s having different fan clutches until now. I've found some really cheap new in box fan clutches for the 04.5 trucks but I have an early 04. Anyone know the difference?
 
Last edited:
I see your point

@ wire harness seems to be different, on the 325 the shroud is fixed to the engine instead of to the cooler like yours have it.
 
Last edited:
Status
Not open for further replies.
Back
Top