Need fill plug for transfer case on a 2007 5.9L Auto transmission

[MichaelRitchey]

All, on the full 4x4 service two weeks ago my mechanic found the fill plug at the top of the transfer case had the socket really messed up and very difficult to get the tool inserted to remove it. He got it out and cleaned up the tool socket. He re-installed it but it needs to be replaced.

Challenge is that neither of the local dealers has a part number for it, has no part in stock, internet search gets me GMC plug info and I called Geno's and no luck there. I cannot find info on the plug size or threads so that I can get a non Dodge plug for it. Suggestions for a solution?

Mike Ritchey
Renton WA

 

[JR]

DiD you check with your local parts store? When I had to get a replacement for the 241dld in my gen 2 one of the local parts houses had it in stock. I think it was a 22mm X 1.5, but again that was on a gen 2.

 

[seafish]

Wrecking yard with ANY 3rd gen 4x4 with the TC should sell you the plug for a few bucks at most.

 

[Ozymandias]

Standard NV/NP Plug, since 25 years or longer the same, absolutely not a Gen3 or even a Dodge only part.
#68001627AA is the Part.

Bought lately 2 so called "Gold Plug" for mine because these plugs have a neodym magnet in it that I wanted.

 

[Motorhead]

This looks like the part number Ozy posted.
https://parts.victorymotorsofcraig.com/oem-parts/mopar-plug-oil-fill-68001627aa

 

[Ozymandias]

Its M22x1.5, I checked yesterday.

 

[CVR222NV]

Standard NV/NP Plug, since 25 years or longer the same, absolutely not a Gen3 or even a Dodge only part.
#68001627AA is the Part.

Bought lately 2 so called "Gold Plug" for mine because these plugs have a neodym magnet in it that I wanted.

Ozy, where did you source the "Gold Plugs"? Sounds like a good idea.

 

[Ozymandias]

I bought direct from manufacturer.

https://goldplug.com/?s=ap22

But they are sold everywhere incl. Amazon or Ebay or else.