Need gage photo's

[CraigJones]

I can't decide where I want my gages. Right now I'm leaning towards getting Autometer Phantom gages with the 3pod windsheild mount. Do you guys have any photo's. Thanks

 

[gsbrockman]

DiPricol's Look Best.....

I have the Autometer Phantom Series Boost & EGT gauges in a cubby hole mount in the dash. I recently purchased an SRT/10 A-Pillar and installed a DiPricol Fuel Pressure gauge there. The DiPricol's match the OE gauges best in both daytime & night time conditions. I'll eventually switch out my Autometers for the DiPricol's a little later. You can find various pics here :



http://www.kydtr.com/coppermine/thumbnails.php?album=43



Greg

 

[fj40dave]

Here's my DiPricols with the dash pod.

 

[Jengle]

Here are my Di's in a three pod A-pillar mount. I get comments that they look factory installed all the time.



#ad

 

[SRadke]

The old style Di Pricol's in the dash. The new ones look similar with better lighting.



#ad

 

[MMeier]

I'll see if I can get some pics of my Autometer Phantoms on my steering pod tomorrow. Look like stockers during the daytime, a lil' off at night but close enough for me !

 

[tURBOdIEZEl]

im not a 3rd genner, but my di pricols are mounted on the a-pillar (boost, pyro, egt. ) pics are in my readers rigs.

 

[TCDiesel]

Steering Column

 

[CraigJones]

Is there anything I should know before I install my Di-pricol gages in the 3 pod windshield mount? Any tips ? Thanks Guys

 

[SRadke]

Find yourself a nice set of directions and go for it. You'll need to tap a wire on the back of the headlight switch for lighting connected to the dimmer and have a +12 volt power supply for the trans tremp gauge, that one should be switched with the key. The Di Pricol gauges have LED as well as incondescent lighting, hook up both sets of wires. Other than that go for it! We're here if you have questions along the way



-Scott

 

[red-rider]

Hey Craig,

I have the triple pillar and windshield pod as well, click on my readers rigs to check them out.

 

[CraigJones]

Looks great. Do you have any tips ?

 

[JRMora]

Maybe I'm too late, but I have a two gage setup (manual transmission), and have an SRT-10 pillar mount for my boost gage (get to keep the handle) and a column mount for my pyro (made by autmeter). They also make a two gage mount for the column as well. Pics in my reader's gallery



Juan