Here I am

need getrag rebuild instructions

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Clutch Questions

Why do the front hubs stick out so friggin far?

Status
Not open for further replies.
I have the 92 manual < no getrag rebuild instructions !! anybody got any info ?? can send me ?? anything will be appreciated?? thanks loco 1
 
loco1,

Send your snail mail address to me at the e-mail address below and I'll send you a copy of what I have.

Jay



-- email address removed --
 
Last edited by a moderator:
Getrag

EZGZ sent me a copy of step by step instruction that was very complete. Check with him. I can't find it on this computer. Must be at home or I would forward.



I don't have a manual. Where/how does one find, steal, buy or other wise possess a copy.



James
 
The 93 service manual has the rebuild section for the getrag transmission in it. I do not have a scanner so I can't send the info.



Where/how does one find, steal, buy or other wise possess a copy.



I went over to the Dodge website and was going to give you a link to the page to order the manual from. But they do not list the 93 manual on the list anymore. (94 is the oldest one on the list now).



So it looks like you might not be able to get it from Dodge any more. :( So ebay might be the place to look around.
 
93 is still available.

I bought a new 93 manual less than a year ago. It was from an independent. The dealer gave me a brochure for the guy. I know I have ordered from him before. I can look for the receipt if needed or I can copy the getrag info on a copy manchine and send it to you. If you want the manual, search the web. There are several suppliers. A typical manual is about 80 dollars with shipping. It is a must have if you are going to keep your truck for a long time. They should come with them new but it would always be gone like the owners manual. This guy had owners manuals too. Hemmings motor news has listings for manual suppliers.

Let me know.

Brennan
 
Status
Not open for further replies.
Back
Top